5-channel dimming actuator, ceiling mount, 5 – 48 V, up to 20 A per channel
The Enertex® KNX LED Dimmsequenzer 20A/5x is a pulse width modulating dimmer for 5 - 48 V LED modules. Per channel the dimmer can dim up to 20 A LED current and in total 480 W power maximum.
- Ceiling mount version (DK) – Lighting and furniture label
- Five channels, pulse-witdh modulated, max. 20 A per channel
- Dimming power up to 480 W
- Variable voltage in- and output 5 to 48 V
- Also suitable for lamps with high inrush currents (up to 100A)
- Integrated protection against over- and undervoltage, overcurrent (selective), overtemperature, reverse polarity
- Helpful commissioning functions via integrated display and push buttons
- Free channel configuration:
- 5x independent channel (i.c.)
- 1x RGBCCT
- 1x RGBW + 1x i.c.
- 1x RGB + 2x i.c.
- 1x RGB + 1x Tunable White (TW)
- 2x TW + 1x i.c.
- 1x TW + 3x i.c.
- Four dimming curves with soft dimming, as well as PWM frequencies between 200 and 1200 Hz for optimal dimming results
- RGBCCT – RGBW: Extended white balancing or extension of tunable white color temperature space by addition of R/G/B
- Automatic imitation of the color temperature of incandescent lamps (Dim2Warm)
- Timebased dimming and day-time-based white control (Human Centric Lighting / HCL)
- Stairway lighting function
- Over 20 predefined sequences and up to 5 freely configurable sequences in RGB or TW operating mode
- Control of an external KNX switch actuator to switch off the LED power supply unit
Actuador de atenuación de 5 canales, montaje en techo, 5-48 V, hasta 20 A por canal
El Enertex® KNX LED Dimmsequenzer 20A / 5x es un dimmer modulante de ancho de pulso para módulos LED de 5 - 48 V. Por canal, el atenuador puede atenuar hasta 20 A de corriente LED y en total 480 W de potencia máxima.
Versión de montaje en techo (DK) - Etiqueta de iluminación y mobiliario
Cinco canales, pulso-con modulación, máx. 20 A por canal
Potencia de atenuación hasta 480 W
Entrada y salida de voltaje variable de 5 a 48 V
También adecuado para lámparas con altas corrientes de entrada (hasta 100 A)
Protección integrada contra sobretensión y subtensión, sobrecorriente (selectiva), sobrecalentamiento, polaridad inversa
Útiles funciones de puesta en marcha mediante pantalla integrada y pulsadores
Configuración de canal libre:
5x canal independiente (i.c.)
1x RGBCCT
1x RGBW + 1x i.c.
1x RGB + 2x i.c.
1x RGB + 1x blanco sintonizable (TW)
2x TW + 1x i.c.
1x TW + 3x i.c.
Cuatro curvas de atenuación con atenuación suave, así como frecuencias PWM entre 200 y 1200 Hz para obtener resultados de atenuación óptimos
RGBCCT - RGBW: Balance de blancos extendido o extensión del espacio de temperatura de color blanco ajustable mediante la adición de R / G / B
Imitación automática de la temperatura de color de las lámparas incandescentes (Dim2Warm)
Atenuación basada en el tiempo y control de blancos basado en el día (Human Centric Lighting / HCL)
Función de iluminación de escalera
Más de 20 secuencias predefinidas y hasta 5 secuencias configurables libremente en modo de funcionamiento RGB o TW
Control de un actuador de conmutación KNX externo para apagar la fuente de alimentación LED
5-channel dimming actuator, ceiling mount, 5 – 48 V, up to 20 A per channel
The Enertex® KNX LED Dimmsequenzer 20A/5x is a pulse width modulating dimmer for 5 - 48 V LED modules. Per channel the dimmer can dim up to 20 A LED current and in total 480 W power maximum.
- Ceiling mount version (DK) – Lighting and furniture label
- Five channels, pulse-witdh modulated, max. 20 A per channel
- Dimming power up to 480 W
- Variable voltage in- and output 5 to 48 V
- Also suitable for lamps with high inrush currents (up to 100A)
- Integrated protection against over- and undervoltage, overcurrent (selective), overtemperature, reverse polarity
- Helpful commissioning functions via integrated display and push buttons
- Free channel configuration:
- 5x independent channel (i.c.)
- 1x RGBCCT
- 1x RGBW + 1x i.c.
- 1x RGB + 2x i.c.
- 1x RGB + 1x Tunable White (TW)
- 2x TW + 1x i.c.
- 1x TW + 3x i.c.
- Four dimming curves with soft dimming, as well as PWM frequencies between 200 and 1200 Hz for optimal dimming results
- RGBCCT – RGBW: Extended white balancing or extension of tunable white color temperature space by addition of R/G/B
- Automatic imitation of the color temperature of incandescent lamps (Dim2Warm)
- Timebased dimming and day-time-based white control (Human Centric Lighting / HCL)
- Stairway lighting function
- Over 20 predefined sequences and up to 5 freely configurable sequences in RGB or TW operating mode
- Control of an external KNX switch actuator to switch off the LED power supply unit
00 34 965 95 95 11
00 34 662 924 893
